Lathes - GM Machinery

DEAN SMITH & GRACE Type 2112 x 80 Straight Bed Centre Lathe. Rebuilt by DSG Year 2000

David_Taylor — Wed, 05 Jan 2022 14:20:48 +0000

Swing over bed 21″. Swing over cross slide 12″. Distance between centres 80″. Spindle speeds 16-2000 rpm. Rapid traverse to saddle. Drilling Attachment. Boring Bar Attachment. Quanitity of toolholders. 16″ dia. 4 Jaw Chuck. 3 Jaw Chuck. Quick Change Toolpost. Lo volt light. Coolant. Sliding Guard. Serial number RE7203. Rebuilt by DSG in Year 2000

The post DEAN SMITH & GRACE Type 2112 x 80 Straight Bed Centre Lathe. Rebuilt by DSG Year 2000 appeared first on GM Machinery.

COLCHESTER Mastiff 1400 x 2032mm Between Centres Gap Bed Centre Lathe

David_Taylor — Thu, 23 Dec 2021 13:31:29 +0000

Swing over bed 535mm. Swing over cross slide 370mm. Swing in gap 810mm. Distance between centres 2032mm. Main Motor 12.5 HP. Spindle Bore 90mm. Spindle speeds 20 – 1400 rpm. 3&4 jaw chucks. Fixed Steady. Ainjest Threading Attachment. 4 Way Toolpost. Splash guards. Coolant. Dual Dials. Anilam Wizard 450 Digital Readout.

Dimensions L x W x H 3500 x 1000 x 1350mm. Approximate weight 2650 kgs.

The post COLCHESTER Mastiff 1400 x 2032mm Between Centres Gap Bed Centre Lathe appeared first on GM Machinery.

HARDINGE HLV-H Precision Toolroom Centre Lathe

David_Taylor — Thu, 23 Dec 2021 12:55:05 +0000

Swing Over Bed 11 “. Distance Between Centres 18”. Infinitely Variable Spindle control 125-3000 rpm. Spindle power 1.5 HP. Spindle bore 1.1/4”. 3 & 4 jaw chucks. Fast lever Collet chuck. 1.1/16”. Complete with selection of collets. Dimensions 68” x 30” x 48”. Weight 817 Kg

The post HARDINGE HLV-H Precision Toolroom Centre Lathe appeared first on GM Machinery.

COLCHESTER Triumph VS2500 x 1250mm Between Centres

David_Taylor — Fri, 15 Oct 2021 15:44:11 +0000

Swing over bed 400mm. Swing in gap 585mm. Swing over cross slide 246mm. Distance between centres 1250mm. Variable spindle speeds 14 – 2500 rpm (3 ranges). Spindle bore 54mm. Fitted with 250mm dia. 3 jaw chuck. 315mmdia. 4 jaw chuck. Coolant. Quick change toolpost. 6 x Toolholders. Newall C80-CSS DRO.

The post COLCHESTER Triumph VS2500 x 1250mm Between Centres appeared first on GM Machinery.

HARRISON V350 x 1250mm Between Centres Gap Bed Centre Lathe. Year 1997

David_Taylor — Fri, 15 Oct 2021 15:28:17 +0000

Swing over bed 350mm. Swing in gap 535mm. Swing over cross slide 196mm. Distance between centres 1250mm. Variable spindle speeds 15 – 3250 rpm (3 ranges) .Spindle bore 42mm. Fitted with 200mm dia. 3 jaw chuck. 250mm dia. 4 jaw chuck.jaw chuck. Fixed steady. Quick change toolpost. 6 x Quick change toolholders. Acu-rite TurnMate DRO. Coolant.

The post HARRISON V350 x 1250mm Between Centres Gap Bed Centre Lathe. Year 1997 appeared first on GM Machinery.

COLCHESTER Triumph VS2500 x 1250mm Gap Bed Centre Lathe with DRO

Nicola Howard — Wed, 22 Sep 2021 11:28:15 +0000

Swing over bed 400mm. Swing in gap 585mm. Swing over cross slide 246mm. Distance between centres 1250mm. Variable spindle speeds 14 – 2500 rpm (3 ranges). Spindle bore 54mm. Fitted with 250mm dia. 3 jaw chuck. 315mmdia. 4 jaw chuck. Chuck guard. Coolant. Quick change toolpost. 6 x Toolholders. Acu-rite DRO.

The post COLCHESTER Triumph VS2500 x 1250mm Gap Bed Centre Lathe with DRO appeared first on GM Machinery.

COLCHESTER Mascot VS2000 Gap Bed Centre Lathe with Heidenhain DRO

Nicola Howard — Tue, 10 Aug 2021 08:47:33 +0000

Swing over bed 460mm. Swing over cross slide 270mm. Swing in gap 730mm. Distance between centres 1500mm between centres. Spindle bore 76mm. Spindle nose D1-8 Camlock. Tailstock taper 6MT. Spindle speeds 3 ranges (inf.var) 20-25, 60-675, 175-2000pm. 310mm dia. jaw chuck. Quick Change toolpost & holders, 2 axis Heidenhain DRO. Motor power 11kW. Coolant.

Dimensions L x W x H 3150mm x 1400mm x 1550mm. Approximate weight 2615 kg.

The post COLCHESTER Mascot VS2000 Gap Bed Centre Lathe with Heidenhain DRO appeared first on GM Machinery.

COLCHESTER Student 1800 x 25” Gap Bed Centre Lathe

David_Taylor — Thu, 18 Mar 2021 10:05:53 +0000

Swing over bed 335 mm. Swing over cross slide 210 mm. Swing in gap 480 mm. Distance between Centres 635 mm. Spindle speeds 22 – 1800 rpm. Spindle bore 40 mm. Spindle nose D1 Camlock. 3 jaw chuck. Quick change toolpost with toolholders. Chuck guard.Coolant. Set of Internal/External Jaws. Main motor 2.2 kW.Serial No.4/0002/06110. Machine weight 790 kgs.

The post COLCHESTER Student 1800 x 25” Gap Bed Centre Lathe appeared first on GM Machinery.

SAFOP LEONARD TR1000 Combined Centre Lathe & Cylindrical Grinding Machine

David_Taylor — Fri, 12 Feb 2021 13:45:15 +0000

Swing over bed 1220 mm. Swing over cross slide 1016 mm. Distance between centres 7,500 mm. Spindle bore 102 mm. Maximum weight between centres 10,000kgs (unsupported). Spindle speeds 4 – 816 rpm. Fitted with 800mm dia. 4 jaw chuck. Newall DP8 Digital readout. Rapid traverse to saddle. 4 screw toolpost clamping on compound slide.1 x 770 mm dia. 3 point roller steady. 1 x 530 mm dia. 3 point roller steady. 1 x 530mm dia. 3 point roller steady.2 x 3 point pad type open sided steady 450mm bore (capacity 330mm approx). 1 x 3 point pad type open sided steady 530mm bore (capacity 230mm approx). Faceplate 1225mm dia. with 4 faceplate jaws. 4 x steady inserts 250mm OD x 90mm bore. 1 x steady insert 370mm OD x 200mm dia. bore. 3 x steady inserts 400mm OD x 200mm bore. 2 x steady inserts 450mm OD x 230mm bore. 5 x 2 point pad steadies 240mm capacity. 5 x 3 point pad steadies 500mm capacity.2 x 3 point steadies 170mm capacity. 5 x 380mm dia. grinding wheel flanges. 9 x 280mm dia grinding wheel flanges. 1 x 170mm dia. grinding wheel flanges. 380mm dia. 3 jaw chuck. 400mm dia. 4 jaw chuck. 225mm dia. 4 jaw chuck. 230mm dia. 3 jaw chuck. Bruckner revolving centre. Jones & Shipman revolving centre. 2 x machine levelling brackets. Boring bar 580mm long x 80mm x 70mm section. Boring bar 760mm long x 75mm x 75mm section. Faceplate fasteners. Coolant/Filtration tank 2300mm long x 1000mm x 1500mm. Machine serial no. 2831. Year 1972

Machine overall dimensions 10320 mm long x 2560 mm wide x 2370 mm high. Approximate weight 25 Tons.

Grinding Capacities

Maximum grinding dia. 1067 mm. Maximum grinding length traverse 7264 mm. Minimum grinding dia. 76mm. Maximum weight 10,000 kgs. Sony Digipac Digital readout. Blue steel rack for grinding wheels.

The post SAFOP LEONARD TR1000 Combined Centre Lathe & Cylindrical Grinding Machine appeared first on GM Machinery.

MERLI CLOVIS Model 70 x 6,800 mm Between Centres Heavy Duty Centre Lathe

David_Taylor — Mon, 09 Aug 2021 09:38:52 +0000

Swing over bed 1,676 mm. Swing over cross slide 1,320 mm. Distance between centres 6,800 mm. Speed range 3 – 300 rpm. Spindle bore 180mm. Spindle power 40 kW. Rapid traverse to saddle. Rapid traverse to tailstock. 2 x Fixed Steadies (650mm dia & 1,000mm dia capacity). Machine fitted with 1,000mm dia 4 jaw chuck. Coolant Tank/Pump.

Dimensions: 10,160mm x 2,413mm x 2,413 x High. Approx weight 24 tons

The post MERLI CLOVIS Model 70 x 6,800 mm Between Centres Heavy Duty Centre Lathe appeared first on GM Machinery.

POREBA TCG125 x 12,000mm Heavy Duty Centre Lathe. Year 1987

GMM Webadmin — Wed, 28 Oct 2020 18:22:23 +0000

Height of centres 625 mm. Maximum swing over bed 1250 mm. Maximum swing over saddle 940 mm. Distance between centres 12,000 mm. Maximum turning length 12,000 mm. Chuck diameter 1250 mm. Maximum clamping dia. in chuck 1050 mm. No. of spindle speeds 24. Range of spindle speeds 1.6 – 315 rpm. Spindle bore 105 mm. Bed width 1100mm.Bed height above floor level 600 mm. Cross slide traverse 800 mm. Top slide traverse 600 mm. Tool cross section 70 mm x 70 mm. Rapid traverse of saddle 4000 mm/min. Rapid traverse of cross slide/tip slide 2000mm/min. No.of metric threads 81. Threads cut with whole saddle 1 – 192 mm. Threads cut with top slide 0.25 – 48 mm. Number of threads per inch 96. Threads cut with whole saddle 30 – 1/8 TPI. Threads cut with top slide 7./2 – 1/32 TPI. Range of tapers turned 1:1.5 – 1:1000. Quill dia. 280 mm. Quill rapid traverse 300 mm/min. Tailstock rapid traverse 1500 mm/min. Main motor 75 kW. Main motor speed 1470 rpm. Rapid feed motor 3 kW. Rapid feed motor speed 1500 rpm. Tailstock traverse motor 1.1 kW. Quill travel motor 2.2 kW. Lubricating system motor 0.6 kW. Equipped with 1250mm dia. 4 jaw chuck & jaws. 2 x fixed steadies.

The post POREBA TCG125 x 12,000mm Heavy Duty Centre Lathe. Year 1987 appeared first on GM Machinery.

BINNS & BERRY Trident L850 Centre Lathe x 12,000mm Between Centres. Rebuilt 2008

GMM Webadmin — Sat, 07 Sep 2019 14:17:23 +0000

Swing over bed 850mm. Swing over saddle 620mm. Distance between Centres 12,000mm. Windmill steady. 2 x 3 point fixed steadies. 3 x 2 point steadies. Coolant. Newall Digital Readout. Rebuilt in 2008

The post BINNS & BERRY Trident L850 Centre Lathe x 12,000mm Between Centres. Rebuilt 2008 appeared first on GM Machinery.

POREBA TPK80 x 4,000mm Gap Bed Centre Lathe. Year of Manufacture 1997

GMM Webadmin — Mon, 12 Aug 2019 15:00:06 +0000

Swing over bed 800 mm. Swing over cross slide 530 mm. Swing in the gap 1080 mm. Width in gap from spindle face 430 mm. Compound slide travel 300 mm. Distance between centres 4000 mm.Spindle bore 95 mm. No of speeds 18. Speed range 7.1 – 710 rpm ( 2 speed motor). Main motor 15/22 kW. Rapid traverse – Longitudinal 4000 mm min. Cross 2000 mm/min. Tailstock Cross displacement +/- 15 mm. Tailstock quill dia 130 mm. Quill travel 300 mm. Morse taper No.6. Clamped between centres (unsupported) 6,000 kgs. Clamped between centres with 1 x Steady 7500 kgs. Clamped between centres with 2 x Steady 9000 kgs. Maximum weight in chuck without tailstock or steady 600 kgs. 760mm dia 4 jaw chuck. 400mm dia. 3 point roller steady. 4 way toolpost. Acu-rite Digital Readout. Coolant

Dimension: L x W x H 6500 mm x 1750 mm x 1370 mm. Approximate weight 7,000 kgs

The post POREBA TPK80 x 4,000mm Gap Bed Centre Lathe. Year of Manufacture 1997 appeared first on GM Machinery.