Quality Used Conventional Machine Tools from GM Machinery. Conventional Machine Tools https://gmmachinery.com Tue, 29 Mar 2022 12:50:48 +0000 en-GB hourly 1 https://gmmachinery.com/wp-content/uploads/2021/03/GM-ICON-150x150.jpg Quality Used Conventional Machine Tools from GM Machinery. Conventional Machine Tools https://gmmachinery.com 32 32 BARBER COLMAN 16/56 Horizontal Gear Hobbing Machine https://gmmachinery.com/machinery-for-sale/barber-colman-16-56-horizontal-gear-hobbing-machine/ Tue, 29 Mar 2022 12:50:48 +0000 https://gmmachinery.com/?post_type=machine&p=13969 Suitable for the cutting of spur/helical gears, pinions, splines, and other workpieces of similar profile up to 16″ (400mm) pitch diameter, and 56″ (1422 mm) face width. Maximum rated diametral pitch (nominal) 6 DP (4.2 module).Maximum diameter of workpiece 16″ (400mm).Maximum hob diameter 5″ (127mm).Maximum hob-slide travel 56″ (1422.4 mm).Maximum work slide travel 8″ (203.2mm).Maximum...

The post BARBER COLMAN 16/56 Horizontal Gear Hobbing Machine appeared first on GM Machinery.

]]> Suitable for the cutting of spur/helical gears, pinions, splines, and other workpieces of similar profile up to 16″ (400mm) pitch diameter, and 56″ (1422 mm) face width. Maximum rated diametral pitch (nominal) 6 DP (4.2 module).Maximum diameter of workpiece 16″ (400mm).Maximum hob diameter 5″ (127mm).Maximum hob-slide travel 56″ (1422.4 mm).Maximum work slide travel 8″ (203.2mm).Maximum distance, work spindle centerline to hob spindle centerline 8.75” (222 mm).Minimum distance work spindle centerline to Hob spindle centerline 0.75” (19.05 mm).Maximum distance work spindle face to standard tailstock-center 84″ (2134 mm).Total length of shaft-type work-piece accommodated provided it can be fed through work-spindle bore 145” (3683 mm).Work spindle thro-bore diameter 4.13″ (105mm).Hob speed range 59 to 246 rpm.Feed ranges 0.015 to 0.150 i.p.r. Main drive motor 5 HP/1800 rpm.Rapid traverse 2 HP.Coolant pump 1/4 HP.Lubrication pump 1/20 HP. Machine Serial No.2927
Dimensions L x W x H 172″ x 62″ x 76” (4369 mm x 1575 mm x 1930 mm). Approx weight 4,320 kgs

The post BARBER COLMAN 16/56 Horizontal Gear Hobbing Machine appeared first on GM Machinery.

]]> FELLOWS 6AH Gear Shaping Machine with Change Gears https://gmmachinery.com/machinery-for-sale/fellows-6ah-gear-shaping-machine-with-change-gears/ Sun, 13 Feb 2022 18:24:03 +0000 https://gmmachinery.com/?post_type=machine&p=13827 Maximum dia. 600mm. Maximum 8 Module.  Fitted with Riser Block. More info soon.

The post FELLOWS 6AH Gear Shaping Machine with Change Gears appeared first on GM Machinery.

]]> Maximum dia. 600mm. Maximum 8 Module.  Fitted with Riser Block. More info soon.

The post FELLOWS 6AH Gear Shaping Machine with Change Gears appeared first on GM Machinery.

]]> BARBER COLMAN 16-36 Horizontal Gear Hobbing Machine with DRO & Change Gears. https://gmmachinery.com/machinery-for-sale/barber-colman-16-36-horizontal-gear-hobbing-machine-with-dro-change-gears/ Sun, 13 Feb 2022 18:04:59 +0000 https://gmmachinery.com/?post_type=machine&p=13824 Maximum rated diameteral pitch (nominal) 6 DP  (4.2 module). Maximum diameter of workpiece  16″ (406mm). Maximum hob diameter  5″  (127mm). Maximum hob-slide travel 36″  (914.4mm). Maximum work slide travel 8″  (203.2mm). Maximum distance, work spindle centerline to   hob spindle centerline 8.75”  (222mm). Minimum distance, work spindle centerline to  Hob spindle centerline 0.75”  (19.05mm).Maximum distance work spindle...

The post BARBER COLMAN 16-36 Horizontal Gear Hobbing Machine with DRO & Change Gears. appeared first on GM Machinery.

]]> Maximum rated diameteral pitch (nominal) 6 DP  (4.2 module). Maximum diameter of workpiece  16″ (406mm). Maximum hob diameter  5″  (127mm). Maximum hob-slide travel 36″  (914.4mm). Maximum work slide travel 8″  (203.2mm). Maximum distance, work spindle centerline to   hob spindle centerline 8.75”  (222mm). Minimum distance, work spindle centerline to  Hob spindle centerline 0.75”  (19.05mm).Maximum distance work spindle face to tailstock-center 39.1/2″  (1003mm). Work spindle thru-bore diameter 3.046″ (77.375mm).Hob speed range  59 – 425  rpm. Feed ranges 0.015 – 0.150 ”/rev. Main drive motor  5 HP/1800 rpm. Rapid traverse  2 HP. Coolant pump   1/4 HP.Lubrication pump 1/20 HP

Machine dimensions L x W x H  102″ (2591mm) x 38″ (950mm) x 76” (1930mm). Approximate weight 3,136 kgs

The post BARBER COLMAN 16-36 Horizontal Gear Hobbing Machine with DRO & Change Gears. appeared first on GM Machinery.

]]> MAZAK Slant Turn 50N with 12.5” Spindle Bore. Twin Chucks. Mazatrol T Plus Control https://gmmachinery.com/machinery-for-sale/mazak-slant-turn-50n-with-12-5-spindle-bore-twin-chucks-mazatrol-t-plus-control/ Wed, 09 Feb 2022 17:51:30 +0000 https://gmmachinery.com/?post_type=machine&p=13766 Maximum swing 805mm.Distance between centres 2267mm.Swing over carriage 560mm.Maximum workpiece length 2010mm.Maximum weight 400kg (chuck work) 2000kg (Shaft work). Maximum cutting load 800kgs.Configuration of bed  45° slant type. Width of slideways 880mm. Turret configuration 15 (10 outside – 5 inside).Tailstock quill dia. 150mm.Tailstock quill stroke 130mm.Tailstock centre 5MT. Spindle bore 317.5 mm. Spindle flange A2-20.Main...

The post MAZAK Slant Turn 50N with 12.5” Spindle Bore. Twin Chucks. Mazatrol T Plus Control appeared first on GM Machinery.

]]> Maximum swing 805mm.Distance between centres 2267mm.Swing over carriage 560mm.Maximum workpiece length 2010mm.Maximum weight 400kg (chuck work) 2000kg (Shaft work). Maximum cutting load 800kgs.Configuration of bed  45° slant type. Width of slideways 880mm. Turret configuration 15 (10 outside – 5 inside).Tailstock quill dia. 150mm.Tailstock quill stroke 130mm.Tailstock centre 5MT. Spindle bore 317.5 mm. Spindle flange A2-20.Main motor 50 HP. Power requirements 72.5 kVA.

Dimensions with swarf conveyor  L x W x H 5815mm x 2665mm x 2727mm high. Approximate weight 11,400 kgs

The post MAZAK Slant Turn 50N with 12.5” Spindle Bore. Twin Chucks. Mazatrol T Plus Control appeared first on GM Machinery.

]]> WEBSTER & BENNETT DCM 120” Double Column Vertical Boring Machine with 2 x Newall DP700 Digital Readouts https://gmmachinery.com/machinery-for-sale/webster-bennett-dcm-120-double-column-vertical-boring-machine/ Thu, 10 Feb 2022 10:33:08 +0000 https://gmmachinery.com/?post_type=machine&p=13712 Table dia. 3048mm. Maximum swing 3708mm. Minimum/Maximum under cross rail 914mm/2134mm. Table speeds 1.5 – 39.5 rpm. Feeds 0.10 – 5 2/rev. Motor 45kW (60hp). 1 x Ram Slide and 1 x Turret Slide. Pendant Control. 2 x Newall DP700 Digital readouts. Powered clamping to cross slide. Chuck jaws. Coolant. Operators platform. Serial No. 6910-1...

The post WEBSTER & BENNETT DCM 120” Double Column Vertical Boring Machine with 2 x Newall DP700 Digital Readouts appeared first on GM Machinery.

]]> Table dia. 3048mm. Maximum swing 3708mm. Minimum/Maximum under cross rail 914mm/2134mm. Table speeds 1.5 – 39.5 rpm. Feeds 0.10 – 5 2/rev. Motor 45kW (60hp). 1 x Ram Slide and 1 x Turret Slide. Pendant Control. 2 x Newall DP700 Digital readouts. Powered clamping to cross slide. Chuck jaws. Coolant. Operators platform. Serial No. 6910-1

Approximate total weight 54.5 Tons

The post WEBSTER & BENNETT DCM 120” Double Column Vertical Boring Machine with 2 x Newall DP700 Digital Readouts appeared first on GM Machinery.

]]> BUTLER 30inch Slotting Machine https://gmmachinery.com/machinery-for-sale/butler-30inch-slotting-machine/ Fri, 11 Feb 2022 16:43:56 +0000 https://gmmachinery.com/?post_type=machine&p=13689 Minimum stroke 12”. Maximum stroke 30”. Cycles per min 7,9,11,15,19,24. Machine complete with slotting bars and tooling.

The post BUTLER 30inch Slotting Machine appeared first on GM Machinery.

]]> Minimum stroke 12”. Maximum stroke 30”. Cycles per min 7,9,11,15,19,24. Machine complete with slotting bars and tooling.

The post BUTLER 30inch Slotting Machine appeared first on GM Machinery.

]]> DALIAN CH300S Horizontal Bandsaw. Year 2011 https://gmmachinery.com/machinery-for-sale/dalian-ch300s-horizontal-bandsaw-year-2011/ Tue, 25 Jan 2022 11:09:53 +0000 https://gmmachinery.com/?post_type=machine&p=13625 Model CH-300S. Semi Auctomatic. Double Column. Blade Motor 2.2Kw. Blade size 3650 x 27 x 0.9 mm. Blade speed 20 – 80 m/min. 415V 3 Phase

The post DALIAN CH300S Horizontal Bandsaw. Year 2011 appeared first on GM Machinery.

]]> Model CH-300S. Semi Auctomatic. Double Column. Blade Motor 2.2Kw. Blade size 3650 x 27 x 0.9 mm. Blade speed 20 – 80 m/min. 415V 3 Phase

The post DALIAN CH300S Horizontal Bandsaw. Year 2011 appeared first on GM Machinery.

]]> PROPEN Model DP5000 Rotary Etching Machine. Year 2012 https://gmmachinery.com/machinery-for-sale/propen-model-dp5000-rotary-etching-machine-year-2012/ Wed, 05 Jan 2022 17:21:16 +0000 https://gmmachinery.com/?post_type=machine&p=13573 Complete with P4500 Rotary Chuck (Year 2013).

The post PROPEN Model DP5000 Rotary Etching Machine. Year 2012 appeared first on GM Machinery.

]]> Complete with P4500 Rotary Chuck (Year 2013).

The post PROPEN Model DP5000 Rotary Etching Machine. Year 2012 appeared first on GM Machinery.

]]> JONES & SHIPMAN Model 2001 Cylindrical Production Grinding Machine. Year 1985 https://gmmachinery.com/machinery-for-sale/jones-shipman-model-2001-cylindrical-production-grinding-machine-year-1985/ Wed, 05 Jan 2022 13:38:43 +0000 https://gmmachinery.com/?post_type=machine&p=13523 Maximum grinding dia. 250mm. Distance between centres 711mm. Complete with Radius Dresser. Fixed Dresser. Dynamic Balancing System. Marposs E9 Sizing Control.Darenth Coolant/Clarifier. Serial number BO13500.

The post JONES & SHIPMAN Model 2001 Cylindrical Production Grinding Machine. Year 1985 appeared first on GM Machinery.

]]> Maximum grinding dia. 250mm. Distance between centres 711mm. Complete with Radius Dresser. Fixed Dresser. Dynamic Balancing System. Marposs E9 Sizing Control.Darenth Coolant/Clarifier. Serial number BO13500.

The post JONES & SHIPMAN Model 2001 Cylindrical Production Grinding Machine. Year 1985 appeared first on GM Machinery.

]]> DEAN SMITH & GRACE Type 2112 x 80 Straight Bed Centre Lathe. Rebuilt by DSG Year 2000 https://gmmachinery.com/machinery-for-sale/dean-smith-grace-type-2112-x-80-straight-bed-centre-lathe-rebuilt-by-dsg-year-2000/ Wed, 05 Jan 2022 14:20:48 +0000 https://gmmachinery.com/?post_type=machine&p=13521 Swing over bed 21″. Swing over cross slide 12″. Distance between centres 80″. Spindle speeds 16-2000 rpm. Rapid traverse to saddle. Drilling Attachment. Boring Bar Attachment. Quanitity of toolholders. 16″ dia. 4 Jaw Chuck. 3 Jaw Chuck. Quick Change Toolpost. Lo volt light. Coolant. Sliding Guard. Serial number RE7203. Rebuilt by DSG in Year 2000

The post DEAN SMITH & GRACE Type 2112 x 80 Straight Bed Centre Lathe. Rebuilt by DSG Year 2000 appeared first on GM Machinery.

]]> Swing over bed 21″. Swing over cross slide 12″. Distance between centres 80″. Spindle speeds 16-2000 rpm. Rapid traverse to saddle. Drilling Attachment. Boring Bar Attachment. Quanitity of toolholders. 16″ dia. 4 Jaw Chuck. 3 Jaw Chuck. Quick Change Toolpost. Lo volt light. Coolant. Sliding Guard. Serial number RE7203. Rebuilt by DSG in Year 2000

The post DEAN SMITH & GRACE Type 2112 x 80 Straight Bed Centre Lathe. Rebuilt by DSG Year 2000 appeared first on GM Machinery.

]]> COLCHESTER Mastiff 1400 x 2032mm Between Centres Gap Bed Centre Lathe https://gmmachinery.com/machinery-for-sale/colchester-mastiff-1400-x-2032mm-between-centres-gap-bed-centre-lathe/ Thu, 23 Dec 2021 13:31:29 +0000 https://gmmachinery.com/?post_type=machine&p=13498 Swing over bed 535mm. Swing over cross slide 370mm. Swing in gap 810mm. Distance between centres 2032mm. Main Motor 12.5 HP. Spindle Bore 90mm. Spindle speeds 20 – 1400 rpm. 3&4 jaw chucks. Fixed Steady. Ainjest Threading Attachment. 4 Way Toolpost. Splash guards. Coolant. Dual Dials. Anilam Wizard 450 Digital Readout. Dimensions L x W...

The post COLCHESTER Mastiff 1400 x 2032mm Between Centres Gap Bed Centre Lathe appeared first on GM Machinery.

]]> Swing over bed 535mm. Swing over cross slide 370mm. Swing in gap 810mm. Distance between centres 2032mm. Main Motor 12.5 HP. Spindle Bore 90mm. Spindle speeds 20 – 1400 rpm. 3&4 jaw chucks. Fixed Steady. Ainjest Threading Attachment. 4 Way Toolpost. Splash guards. Coolant. Dual Dials. Anilam Wizard 450 Digital Readout.

Dimensions L x W x H 3500 x 1000 x 1350mm. Approximate weight 2650 kgs.

The post COLCHESTER Mastiff 1400 x 2032mm Between Centres Gap Bed Centre Lathe appeared first on GM Machinery.

]]> HARDINGE HLV-H Precision Toolroom Centre Lathe https://gmmachinery.com/machinery-for-sale/hardinge-hlv-h-precision-toolroom-centre-lathe/ Thu, 23 Dec 2021 12:55:05 +0000 https://gmmachinery.com/?post_type=machine&p=13489 Swing Over Bed 11 “. Distance Between Centres 18”. Infinitely Variable Spindle control 125-3000 rpm. Spindle power 1.5 HP. Spindle bore 1.1/4”. 3 & 4 jaw chucks. Fast lever Collet chuck. 1.1/16”. Complete with selection of collets. Dimensions 68” x 30” x 48”. Weight 817 Kg  

The post HARDINGE HLV-H Precision Toolroom Centre Lathe appeared first on GM Machinery.

]]> Swing Over Bed 11 “. Distance Between Centres 18”. Infinitely Variable Spindle control 125-3000 rpm. Spindle power 1.5 HP. Spindle bore 1.1/4”. 3 & 4 jaw chucks. Fast lever Collet chuck. 1.1/16”. Complete with selection of collets. Dimensions 68” x 30” x 48”. Weight 817 Kg

 

The post HARDINGE HLV-H Precision Toolroom Centre Lathe appeared first on GM Machinery.

]]> ABERLINK Axiom 600 Co-ordinate Measuring Machine. Year 2014 https://gmmachinery.com/machinery-for-sale/aberlink-axiom-600-co-ordinate-measuring-machine-year-2014/ Thu, 23 Dec 2021 12:25:29 +0000 https://gmmachinery.com/?post_type=machine&p=13481 Axis Travel (mm) X 640 Y 900 Z 500. Volumetric Accuracy: TP20 (2.4 + 0.4L/100) µm. TP200 (2.3 + 0.4L/100) µm. SP25M (2.1 + 0.4L/100) µm. Scale Resolution: 0.5µm. Optimum Temp Range 18-22°C. Operational Temp Range  5 – 45°C. Granite Table. Loading capacity  500kg. Max. Velocity Vector 600mm/sec. Max. Acceleration Vector  600mm/sec². Air Consumption  50...

The post ABERLINK Axiom 600 Co-ordinate Measuring Machine. Year 2014 appeared first on GM Machinery.

]]> Axis Travel (mm) X 640 Y 900 Z 500. Volumetric Accuracy: TP20 (2.4 + 0.4L/100) µm. TP200 (2.3 + 0.4L/100) µm. SP25M (2.1 + 0.4L/100) µm. Scale Resolution: 0.5µm. Optimum Temp Range 18-22°C. Operational Temp Range  5 – 45°C. Granite Table. Loading capacity  500kg. Max. Velocity Vector 600mm/sec. Max. Acceleration Vector  600mm/sec². Air Consumption  50 l/min (1.8 cfm). Required Air Pressure: 5 bar (72 psi). Overall Machine Size (mm) L x W x H 1040mm x 200mm x 2320mm

The post ABERLINK Axiom 600 Co-ordinate Measuring Machine. Year 2014 appeared first on GM Machinery.

]]> KESTREL Dynascope Non Contact Measuring System https://gmmachinery.com/machinery-for-sale/kestrel-dynascope/ Sat, 15 Jan 2022 16:14:36 +0000 https://gmmachinery.com/?post_type=machine&p=13363 For inspection and measurement of 2-dimensional parts. Optical image clearly defines edges, offering superb resolution and contrast. Powerful and intuitive microprocessors deliver simple, fast results. Optional video edge detection for higher throughput measurements. See PDF for futher information.  

The post KESTREL Dynascope Non Contact Measuring System appeared first on GM Machinery.

]]> For inspection and measurement of 2-dimensional parts. Optical image clearly defines edges, offering superb resolution and contrast. Powerful and intuitive microprocessors deliver simple, fast results. Optional video edge detection for higher throughput measurements. See PDF for futher information.

 

The post KESTREL Dynascope Non Contact Measuring System appeared first on GM Machinery.

]]> MITUTOYO PJ300 Profile Projector https://gmmachinery.com/machinery-for-sale/mitutoyo-pj300-profile-projector/ Sat, 15 Jan 2022 16:01:03 +0000 https://gmmachinery.com/?post_type=machine&p=13361 The post MITUTOYO PJ300 Profile Projector appeared first on GM Machinery.

]]> The post MITUTOYO PJ300 Profile Projector appeared first on GM Machinery.

]]> GRAVOGRAPH Engraving Machine https://gmmachinery.com/machinery-for-sale/gravograph-engraving-machine/ Sun, 13 Feb 2022 16:39:28 +0000 https://gmmachinery.com/?post_type=machine&p=13360 The post GRAVOGRAPH Engraving Machine appeared first on GM Machinery.

]]> The post GRAVOGRAPH Engraving Machine appeared first on GM Machinery.

]]> GRAVOGRAPH XF500 Pn/D Etching Machine. Year 2014 https://gmmachinery.com/machinery-for-sale/gravograph-xf500-pn-d-etching-machine-year-2014/ Sun, 13 Feb 2022 16:34:44 +0000 https://gmmachinery.com/?post_type=machine&p=13359 Voltage 115 – 230. Power 120 VA. 50-60 Hz. Pressure 5.5 bar. Year 2014

The post GRAVOGRAPH XF500 Pn/D Etching Machine. Year 2014 appeared first on GM Machinery.

]]> Voltage 115 – 230. Power 120 VA. 50-60 Hz. Pressure 5.5 bar. Year 2014

The post GRAVOGRAPH XF500 Pn/D Etching Machine. Year 2014 appeared first on GM Machinery.

]]> AXMINSTER Horizontal Linishing Machine on Steel Bench https://gmmachinery.com/machinery-for-sale/axminster-horizontal-linishing-machine-on-steel-bench/ Sun, 13 Feb 2022 15:56:12 +0000 https://gmmachinery.com/?post_type=machine&p=13346 The post AXMINSTER Horizontal Linishing Machine on Steel Bench appeared first on GM Machinery.

]]> The post AXMINSTER Horizontal Linishing Machine on Steel Bench appeared first on GM Machinery.

]]> BERGONZI T40 1250mm Radial Arm Drill with Box Table https://gmmachinery.com/machinery-for-sale/bergonzi-t40-1250mm-radial-arm-drill-with-box-table/ Sat, 15 Jan 2022 16:57:55 +0000 https://gmmachinery.com/?post_type=machine&p=13338 More details posted soon.

The post BERGONZI T40 1250mm Radial Arm Drill with Box Table appeared first on GM Machinery.

]]> More details posted soon.

The post BERGONZI T40 1250mm Radial Arm Drill with Box Table appeared first on GM Machinery.

]]> BUTLER HE8 8 metre CNC Elgamill with Heidenhain 155 Control https://gmmachinery.com/machinery-for-sale/butler-he8-8-metre-cnc-elgamill-with-heidenhain-155-control/ Fri, 14 Jan 2022 17:20:35 +0000 https://gmmachinery.com/?post_type=machine&p=13337 Bed size 8,000mm x 1,030mm. X (Longitudinal) 6,200mm. Y (Vertical)  1,980mm. Z (Ram) 1,050mm. Spindle Power 37Kw (AC). Spindle Speeds to 2,000 rpm. Fitted with Butler Mk IV Universal Head. Enclosed Guarding. Overall dimensions L x W x H 11000mm x 4000mm x 4000mm (includes peripheral guarding). Approximate weight 23 tons.

The post BUTLER HE8 8 metre CNC Elgamill with Heidenhain 155 Control appeared first on GM Machinery.

]]> Bed size 8,000mm x 1,030mm. X (Longitudinal) 6,200mm. Y (Vertical)  1,980mm. Z (Ram) 1,050mm. Spindle Power 37Kw (AC). Spindle Speeds to 2,000 rpm. Fitted with Butler Mk IV Universal Head. Enclosed Guarding.

Overall dimensions L x W x H 11000mm x 4000mm x 4000mm (includes peripheral guarding). Approximate weight 23 tons.

The post BUTLER HE8 8 metre CNC Elgamill with Heidenhain 155 Control appeared first on GM Machinery.

]]> SGS 20 Ton H Frame Hydraulic Press https://gmmachinery.com/machinery-for-sale/sgs-20-ton-h-frame-hydraulic-press/ Sun, 13 Feb 2022 15:39:36 +0000 https://gmmachinery.com/?post_type=machine&p=13327 Maximum capacity 20 ton. Stroke 165mm. Work Range 0-895mm. Machine weight 126 kg.

The post SGS 20 Ton H Frame Hydraulic Press appeared first on GM Machinery.

]]> Maximum capacity 20 ton. Stroke 165mm. Work Range 0-895mm. Machine weight 126 kg.

The post SGS 20 Ton H Frame Hydraulic Press appeared first on GM Machinery.

]]> STARTRITE 14-S-5 Vertical Bandsaw https://gmmachinery.com/machinery-for-sale/startrite-14-s-5-vertical-bandsaw/ Thu, 24 Mar 2022 14:29:16 +0000 https://gmmachinery.com/?post_type=machine&p=13322 The post STARTRITE 14-S-5 Vertical Bandsaw appeared first on GM Machinery.

]]> The post STARTRITE 14-S-5 Vertical Bandsaw appeared first on GM Machinery.

]]> WMW Heavy Duty Pillar Drill https://gmmachinery.com/machinery-for-sale/wmw-heavy-duty-pillar-drill/ Thu, 24 Mar 2022 16:34:43 +0000 https://gmmachinery.com/?post_type=machine&p=13321 The post WMW Heavy Duty Pillar Drill appeared first on GM Machinery.

]]> The post WMW Heavy Duty Pillar Drill appeared first on GM Machinery.

]]> BATY R14 Bench Mounted Profile Projector https://gmmachinery.com/machinery-for-sale/baty-r14-bench-mounted-profile-projector/ Wed, 05 Jan 2022 15:53:35 +0000 https://gmmachinery.com/?post_type=machine&p=13313 The Baty R14 bench mount profile projector with its 340mm screen combines high accuracy non-contact measurement and inspection with a large 175mm x 100mm measuring range. The horizontal light path configuration is ideally suited to turned machined parts that can be secured to the workstage using a range of optional accessories from the Baty fixture...

The post BATY R14 Bench Mounted Profile Projector appeared first on GM Machinery.

]]> The Baty R14 bench mount profile projector with its 340mm screen combines high accuracy non-contact measurement and inspection with a large 175mm x 100mm measuring range.
The horizontal light path configuration is ideally suited to turned machined parts that can be secured to the workstage using a range of optional accessories from the Baty fixture family. The compact and robust lightweight chassis makes the R14 ideal for workshop environments.  Features are  340mm (14″) screen with 90º crosslines and chart clips.  Profile illumination with halogen lamp and green filter.  Lens magnification choice 10x, 20x, 25x, 50x and 100x.  Surface illumination (fibre optic). Helix adjustment of light source ± 7º for accurate thread form projection. Workstage with machined slot for holding accessories. Workstage measuring range of 175mm (7″) x 100mm (4″).  Digital angle measurement to 1 minute. 0.5 micron resolution

The post BATY R14 Bench Mounted Profile Projector appeared first on GM Machinery.

]]>